Scantronic: 9853 Hybrid Alarm System

The Scantronic 9853EN-00 is a fully programmable, 16 zone (2- wire FSL) security panel designed to conform to PD6662:2004 Grade 3 system requirements.

The panel includes an integral dialler modem that can communicate any alarm activation or service information to an Alarm Receiving Centre.

Expandable up to 40 zones using wired or 868MHz narrowband wire-free expanders, the 9853EN-00 provides flexibility whatever your security requirements. Wire-free expanders eliminate the need for complex wiring further minimising disruption to your décor during installation.

The 9853EN-00 is ideally suited to both home, commercial and industrial security applications. It combines maximum flexibility with ease of use to provide security, when and where you need it.

Simple A, B, C and D setting options allow you to split the system into four individually-controllable sub-systems letting you set either the whole or just parts, or any combination.
Up to 4 attractive remote keypads can be added to any system. The 9940 keypad supplied (as pictured) uses a 4 or 6-digit PIN code to control system operation. An integral electronic reader simplifies operation and minimises the chance of error by allowing operators to use a personal-encrypted, key-ring proximity tag instead of a code. The alternative 9930 keypad can also have this fitted as an optional extra.

The panel’s integral 2400/300 baud CCITT V21 full-duplex modem is used for alarm and service communication, secondary outputs can operate other communication devices such as BT RedCare STUs. To reduce maintenance, the 9853EN-00 has full remote upload/download capability allowing your installer to program and perform diagnostic tests without having to visit your premises.